MODELLING THE RHEOLOGY AND DETERMINATION OF FLUID LOSS OF DRILLING MUD FORMULATED FROM ORGANOPHYLLIC CLAY DEVELOPED FROM LOCALLY SOURCED NIGERIAN BENTONITIC CLAY

Bilal S. (2015): Investigation and Enhancement of Quality of Nigerian Bentonitic Clay Samples for Oil and Gas Drilling Operation. Unpublished Ph.D Thesis, Department of Chemical Engineering Ahmadu Bello University, Zaria, Nigeria.

Bird, R.B.; Grance, D.and Yarusso, B.J. ,(1982), “The Rheological and Flow of Viscoplastic Materials”. Review in Chemical Engineering (1), pp .1-70

Bourgouyne, A. T., Millhiem, K.K., Chenevert, M.E., Young, F.S. (1991). Applied Drilling Engineering, 2nd edition, Society of Petroleum Engineers, Richardson,Texas

Dardir, M.M., Ibrahime, S, Soliman, M., Deasouky, S.D., and Hafiz. A.A., (2014),” Preparation of some estramides as Synthetic Based Drilling Fluid,” Egyptian Journal of petroleum. 23(1), pp. 35-43.

Hemphill, T.; Campos, W.; and Pilehvari, A.,(1993), ‘Mud Rheology”. Oil and Gas Journal, 91, pp .34

Folayan, J.A., Anawe, P.L., Abioye, P.O and Elehinafe, F.B. (2017) ‘Selecting the Most Appropriate Model for Rheological Characterization of Synthetic Based Drilling Mud’ International Journal of Applied Engineering Research ISSN 0973-4562 Volume 12, Number 18 (2017) pp. 7614-7629

Ibrahim A.O. (2016): Enhancement of Gambe Bentonic Clay using Fermentable and Unfermentable Polymers for Drilling Fluid Application Unpublished MSc Thesis, Department of Chemical Engineering Ahmadu Bello University, Zaria, Nigeria.

Pankil Singla, Rajeev Mehta, Siddh Nath Upadhyay (2012)’Clay Modification by the Use of Organic Cations’ http://dx.doi.org/10.4236/gsc.2012.21004 Accessed on February 2012 (http://www.SciRP.org/journal/gsc)

RMRDC. (2010). Non-Metallic Mineral Endowments in Nigeria: Bentonite. Abuja: Raw Materials Reserch and Development Council

Schmidt D. O.,Roos A.F and Cline J.T, (1987) Interaction of Water With Organophilic Clay in Base Oils to Build Viscosity. A conference paper presented at the 62nd Annual Technical Conference and Exhibition of the Society of Petroleum Engineers held in Dallas, TX September 27-30.