MECHANICAL PROPERTIES AND MICROSTRUCTURE OF EPOXY, HORN, ALKALINE TREATED/UNTREATED COCONUT SHELL PARTICULATES HYBRID COMPOSITE

Authors

Keywords:

Composite, polymer, synthetic, natural, alkaline

Abstract

ABSTRACT: The mechanical properties (Tensile and Flexural Strengths) of sheep horn, treated and untreated coconut shell particles reinforced epoxy composite were investigated in this work. The composite was formulated using design expert software, with weight fraction of epoxy resin varied from 90 to 100%, while that of each of the sheep horn and coconut shell particles varied from 0 to 5 % weight, resulting in the composite of single and hybrid reinforcements. The results obtained showed that tensile and flexural strengths of the hybrid composite were superior to those of the individual fiber reinforced composite. Maximum tensile strength and flexural strength of 36.52 MPa and 67.93 MPa respectively, representing 74.3%, and 35.6% improvement, compared to the tensile strength and flexural strength of the control sample were obtained with the hybrid composite sample containing a blend of 5% wt. sheep horn and 3% wt. treated coconut shell particles. The microstructure analysis revealed the enhanced interfacial adhesion between the matrix and the reinforcement of the composite samples containing alkaline treated coconut shell particles. Hence, alkaline treatment is a good natural fiber’s surface modification technique to improve adhesion between the fibers and the matrix.

Author Biographies

Asipita

Professor of Materials and Metallurgical Engineering, Federal University of Technology, Minna, Nigeria.

Saka

Professor of Chemical Engineering, Federal University of Technology, Minna, Nigeria.

Dimensions

Abdulrahim, M. Y., Yawas, D. S., Mohammed, R. A., & Afolayan, M. O. (2021). Hybridization of polyester/banana stem fiber and cow horn particulate composite for possible production of military helmet. International Journal of Sustainable Engineering, 14(5), 1170-1180.

Adah, P. U., Nuhu, A. A., Salawu, A. A., Hassan, A. B., & Ubi, P. A. (2024). Characterization of periwinkle shell ash reinforced polymer composite for automotive application. FUDMA Journal of Sciences (FJS), 8(1), 83-92. https://doi.org/10.33003/fjs-2024-0801-2158

Agunsoye, J. O., Talabi, S. I., & Sanni, O. S. (2012). Study of mechanical behaviour of coconut shell reinforced polymer matrix composite. Journal of Minerals and Materials Characterization and Engineering, 11, 774-779.

Akindapo, J. O., Harrison, A., & Sanusi, O. M. (2014). Evaluation of mechanical properties of coconut shell fibres as reinforcement material in epoxy matrix. International Journal of Engineering Research & Technology, 3(2), 2337-2348.

Andezai, A. M., Masu, L. M., & Maringa, M. (2020). Investigating the mechanical properties of reinforced coconut shell powder/epoxy resin composites. International Journal of Engineering Research and Technology, 13(10), 2742-2751.

Arthanarieswaran, V. P., Kumaravel, A., & Saravanakumar, S. S. (2015). Physico-chemical properties of alkali-treated acacia leucophloea fibers. International Journal of Polymer and Analytical Chemistry, 20, 704-713. https://doi.org/10.1080/1023666X.2015.1081133

Bello, S. A., Agunsoye, J. O., & Hassan, S. B. (2015). Synthesis of coconut shell nanoparticles via a top-down approach: Assessment of milling duration on the particle sizes and morphologies of coconut shell nanoparticles. Materials Letters, 159, 514-519.

Bodunrin, M. O., Alaneme, K. K. & Chown, L. H. (2015). Aluminium matrix hybrid composites: a review of reinforcement philosophies; mechanical, corrosion and tribological characteristics. Journal of Material Research Technology. https://dx.doi.org/10.1016/j.jmrt.2015.05.003

Fiore, V., Bella, G. D., & Valenza, A. (2015). The effect of alkaline treatment on mechanical properties of kenaf fibers and their epoxy composites. Composites: Part B, 68, 14 – 21. https://dx.doi.org/10.1016/j.compositesb.2014.08.025

Fiore, V., Scalici, T., & Valenza, A. (2014). Characterization of a new natural fiber from Arundo donax L. as potential reinforcement of polymer composites. Carbohydr. Polym., 106, 77-83.

Gupta, M., Srivastava, R., & Bisaria, H. (2015). Potential of jute fibre reinforced polymer composites: a review. International Journal of Fiber and Textile Research, 5(3), 30-38.

Herlina-Sari, N., Wardana, I. N. G., Irawan, Y. S., & Siswanto, E. (2018). Characterization of the chemical, physical, and mechanical properties of NaOH-treated natural cellulosic fibers from corn husks. Journal of Natural Fibers, 15(4), 545-558.

Keya, K. N., Kona, N. A., Koly, F. A., Maraz, K. M., Islam, M. N., & Khan, R. A. (2019). Natural fiber reinforced polymer composites: History, types, advantages, and applications. Material Science and Engineering Reports, 1(2), 69-87.

Kumar, A. P., Mohamed, M. N., Philips, K. K., & Ashwin, J. (2016). Development of novel natural composites with fly ash reinforcements and investigation of their tensile properties. Applied Mechanics and Materials, 852, 55-60.

Kumar, M., Bala, A., Prithviraj, M., Raghavendra, & Prasad, V. (2018). Study on the effect of varying volume fraction on mechanical properties of coconut shell powder reinforced epoxy matrix composite. IOP Conference Series: Materials Science and Engineering, https://doi:10.1088/1757-899X/376/1/012097

Mansour, R., Hocine, O., Abdellatif, I., & Noureddine, B. (2011). Effect of chemical treatment on flexure properties of natural fiber-reinforced polyester composite. Procedia Engineering, 10, 2092-2097.

Moh’d-Nazarudin, Z., Moh’d-Ariff, J., Masitah, A. K., Nur-Shafiqah, O., Maizatulnisa, O., Syaidatul-Hazira, M. N., & Moh’d-Nurul Azman, M. T. (2013). The effect of alkaline treatment on water absorption and tensile properties of non-woven kenaf polyester composite. Advanced Materials Research, 812, 258-262. https://doi:10.4028/www.scientific.net/AMR.812.258

Mohankumararadhya, H. M., Wadappi, P., Chandrashekar, A., & Naik, Y. (2020). Studies on bio waste product particle reinforced polymer composites. AIP Conference Proceedings, https://doi.org/10.1063/5.0022746

Nithyanandhan, T., Rohith, K., Sidharath, C.G., Sachin, C. & Jagadesh, S. (2017). Investigation of mechanical properties of aluminium based hybrid composites. International Journal of Innovative Research in Science, Engineering and Technology, 6(7), 118-126.

Obiukwu, O. O., Uchechukwu, M. N., & Nwaogwugwu, M. C. (2016). Study on the properties of coconut shell powder reinforced high-density polyethylene composite. FUTO Journal Series, 2(2), 43-55.

Onuoha, C., Onyemaobi, O., & Anyakwo, C. (2017). Effect of filler loading and particle size on the mechanical properties of periwinkle shell filled recycled polypropylene composites. American Journal of Engineering Research, 6, 72-79.

Onwumere, R. A., Nnakwo, K. C., & Okorie, B. A. (2019). Effect of alkaline treatment on mechanical and thermal properties of coconut shell particulates reinforced epoxy composite. American Journal of Chemistry and Materials Science, 6(1), 10-14.

Osokoya, O. (2017). An evaluation of polymer composites for car bumper beam. International Journal of Automotive Composites, 3(1), 44-60.

Palta, E., Fang, H., & Weggel, D. C. (2018). Finite element analysis of the advanced combat helmet under various ballistic impacts. International Journal of Impact Engineering, 112, 125-143.

Rajkumar, R., Manikandan, A., & Saravanakumar, S. S. (2016). Physicochemical properties of alkali treated new cellulosic fiber from cotton shell. International Journal of Polymer and Analytical Chemistry, 21(4), 359-364.

Reddy, B. R., & Dhoria, S. H. (2018). Effect of alkaline treatment on mechanical properties of kenaf fiber reinforced polyester composites. Advances in Mechanical Design, Materials and Manufacture, AIP Conference Proceedings, https://doi.org/10.1063/1.5029673

Samaei, S. E., Mahabadi, H. A., Mousavi, S. M., Khavanin, A., Faridan, M., & Taban, E. (2020). The influence of alkaline treatment on acoustical, morphological, tensile and thermal properties of Kenaf natural fibers. Journal of Industrial Textiles, https://doi:101177/1528083720944240

Sarki, J., Hassan, S. B., Aigbodion, V. S., & Ogbenevweta, J. E. (2011). Potential of using coconut shell particle fillers in eco-composite materials. Journal of Alloys and Compounds, 509(5), 2381-2385.

Senthilkumar, K., Chandrasekar, M., Othman, Y. A., Hassan, F., Jawaid, M., & Azeem, M. A. (2022). Flexural, impact and dynamic mechanical analysis of hybrid composites: Olive tree leaves powder/ pineapple leaf fibre/epoxy matrix. Journal of Materials Research and Technology, 21, 4241-4252.

Setty, V. K. S. N., Govardhan, G., Rangappa, S. M., & Siengchin, S. (2020). Raw and chemically treated bio-waste filled (Limonia acidissima shell powder) vinyl ester composites: Physical, mechanical, moisture absorption properties, and microstructure analysis. Journal of Vinyl Additive Technology, 1-11. https://doi:10.1002/vnl.21787

Somashekhar, T. M., Premkumar, N., Vighnesha, N., Mallikappa, K., & Rahul, S. (2018). Study of mechanical properties of coconut shell powder and tamarind shell powder reinforced epoxy composites. IOP Conference Series: Materials Science and Engineering, https://doi:10.1088/1757-899X/376/1/012105

Wang, X., Xie, J., Zhang, H., Zhang, W., An, S., Chen, S., & Luo, C. (2019). Determining the lignin distribution in plant fiber cell walls based on chemical and biological methods. Cellulose, 26, 4241-4252.

Published

30-06-2024

How to Cite

MECHANICAL PROPERTIES AND MICROSTRUCTURE OF EPOXY, HORN, ALKALINE TREATED/UNTREATED COCONUT SHELL PARTICULATES HYBRID COMPOSITE. (2024). FUDMA JOURNAL OF SCIENCES, 8(3), 214-221. https://doi.org/10.33003/fjs-2024-0803-2464

Issue

Vol. 8 No. 3 (2024): FUDMA Journal of Sciences - Vol. 8 No. 3 (Special Issue)

Section

Research Articles
Copyright & Licensing

FUDMA Journal of Sciences

How to Cite

MECHANICAL PROPERTIES AND MICROSTRUCTURE OF EPOXY, HORN, ALKALINE TREATED/UNTREATED COCONUT SHELL PARTICULATES HYBRID COMPOSITE. (2024). FUDMA JOURNAL OF SCIENCES, 8(3), 214-221. https://doi.org/10.33003/fjs-2024-0803-2464